Lexmark T65x and X65x Mono Product Study Guide Rev 1.47
For Training Purposes Only 6/3/2009
30
ONCE YOU HAVE CHECKED THE ITEMS AS SUGGESTED BELOW, TAKEN THE ACTION
SUGGESTED,AND RESEATED OR REINSTALLED THE ITEM CORRECTLY, IF THE PROBLEM STILL
PERSISTS: REPLACE THE ITEM
Repeating defects
REPEATING MARKS OCCUR EVENLY DOWN THE PAGER
Replace the charge rolls if the defects occur every 28.3 mm (1.11 in.).
Replace the transfer roller if the defects occur every 51.7 mm (2.04 in.).
Replace the print cartridge if the defects occur every:
• 47.8 mm (1.88 in.)
•
96.8 mm (3.81 in.)
Replace the fuser if the defects occur every:
• 88.0 mm (3.46 in.)
•
95.2 mm (3.75 in.)
Print out and
use this
Print
Defects
Page - - - >
to visually
determine
what
component
may be
causing the
print defect.
To Next Page
Loading...
