Lexmark T650 Series User Manual

8. Place the cartridge so that the waste bin is face-up. Take a
razor blade and cut the foam seal that runs along the back
edge of the wiper blade to separate it from the cartridge. Make
sure to cut along the plastic/foam and not the blade.
9. Hold the cartridge so that it is upright (standing up with the waste bin on the table). With one hand, hold the laser shutter open,
and with the other hand, remove the wiper blade. Work the blade off carefully so that the alignment pin does not break!
LEXMARK T650 SERIES • TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.

Lexmark T650 Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 45 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 200, 000 pages
Standard Output Capacity	250 sheets
Processor Speed	500 MHz
Connectivity	USB, Ethernet
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Mac OS, Linux
Memory	128 MB, expandable to 640 MB
Standard Input Capacity	650 sheets