35
IPDS Printer and Host Setup Guide Printer and Host Timeout Values
MVS host and Printer IPDS Timeout Values
Note 1: The number of seconds should be greater than or equal to 15 seconds.
Note 2: This timer combination is not recommended. The printer will remain busy after the IPDS job has
completed. Jobs from other IPDS sessions and non-IPDS jobs waiting on other ports will not print.
Note 3: This timer combination is not recommended. If used, the difference between the two timers should be
a minimum of 30 seconds.
Note 4: A printer IPDS Timeout value of 15 sec or 30 sec is recommended. This allows 15 or 30 seconds for
the host to send another job before the printer times out and starts printing jobs waiting on other ports.
Printer
IPDS Timeout
STARTUP PROC
Disconnect Interval (DISCINTV)
STARTUP PROC
Valid Port Number (PORTNO)
Note
Host Controlled Specific Number of Seconds 5001, 9600 1
Host Controlled 0 None 2
15 sec to 10 Min Specific Number of Seconds 5001, 9600 3
15 sec to 10 Min 0 5001, 9600 4
To Next Page
Loading...
