4
IPDS Printer and Host Setup Guide Equipment Requirements And Specifications
EQUIPMENT REQUIREMENTS AND
SPECIFICATIONS
This guide provides information to help you configure the host and printer to print IPDS jobs. The information in
this guide applies to the following printers and Multifunction Products (MFPs).
• Lexmark C734, C736
• Lexmark E460dn, E460dw, E462dtn
• Lexmark T650, T652
• Lexmark T654
• Lexmark T656dne
• Lexmark W850
• Lexmark X463de, X464de
• Lexmark X466dte, X466dtwe
• Lexmark X651de, X652de
• Lexmark X654de, X656de
• Lexmark X658de
• Lexmark X734de, X736de, X738de
• Lexmark X860de, X862de, X864de
Unless otherwise specified, in the rest of this guide the term "printer" covers both printers and MFPs.
To print IPDS jobs, the printer must have the optional Card for IPDS and SCS/TNe installed, a minimum of 128
MB of user memory (DRAM) for printers, a minimum of 256 MB of user memory (DRAM) for MFPs, and one of
the following:
• Standard Network (Ethernet connection integrated into printer system board)
• MarkNet internal LAN print server (optional card providing Ethernet connection).
• Lexmark wireless internal print server.
To install the printer, determine the host, host software, and type of printer connection you will be using. Find
the appropriate chapter in the Table of Contents and follow the steps to configure the host and printer.
To Next Page
Loading...
