To Next PageTo Next Page
How to fix incorrect characters printing on Lexmark Printer?
Incorrect characters may print due to: * An incompatible parallel cable. Use an IEEE 1284-compliant cable. * The printer being in Hex Trace mode. Turn the printer off and back on to exit Hex Trace mode.
What to do if Lexmark W840 shows blank operator panel display?
If the operator panel display is blank or shows only diamonds, the printer self-test has likely failed. Turn the printer off, wait 10 seconds, and then turn it back on. If the 'Performing Self Test' and 'Ready' messages do not appear, turn the printer off and call for service.
Why held jobs do not print on my Lexmark W840 Printer?
Held jobs on your Lexmark Printer might fail to print due to a formatting error or invalid data. You can try to print the job (knowing that only part of it may print), delete the job, or free up additional printer memory by deleting other held jobs.
Why do jobs not print on my Lexmark W840?
Several factors can cause print jobs to fail on a Lexmark Printer. First, ensure that 'Ready' or 'Power Saver' is displayed before printing by pressing the printer's button. If the output bin is full, remove the paper. Also, ensure that the tray has paper. Verify you are using the correct printer driver for your printer. For network printing, check that the printer is properly configured. Finally, ensure you're using the recommended interface cable and that it's securely connected.
Why is my Lexmark W840 printing a blank white page?
If the entire page is white when using your Lexmark Printer, make sure the packaging material is removed from the print cartridge and that the print cartridge is installed correctly. Also, the toner may be low. To utilize the remaining toner, remove the cartridge by gripping the handles with both hands. With the cartridge arrows pointing downward, shake the print cartridge back and forth. Reinstall the cartridge, and then press .
What to do if Lexmark Printer prints blank pages?
If blank pages feed into the output bin, an incorrect media type might be loaded in the tray. Load the correct media type for your print job, or change the Paper Type setting to match the loaded media.
What to do if held jobs do not print on Lexmark Printer?
If held jobs do not print, it could be due to: * A formatting error. Try printing the job (knowing only part of it might print), or delete the job. * The printer has received invalid data. Delete the job. * Insufficient memory. Free up printer memory by deleting other held jobs.
Why does my Lexmark W840 frequently jam?
Frequent paper jams can occur in Lexmark Printers due to: * Using paper that doesn't meet the printer's specifications. Use recommended paper and specialty media. * Overloading the tray or multipurpose feeder. Ensure the paper stack doesn't exceed the maximum height. * Incorrectly positioned guides in the tray. Adjust the guides to fit the paper size. * Paper absorbing moisture. Load paper from a fresh package and store it properly.
General| Color | No |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 6.8 s |
| Print speed (black, normal quality, A4/US Letter) | 50 ppm |
| Internal memory | 256 MB |
| Sound power level (standby) | 28 dB |
| Sound pressure level (printing) | 54 dB |
| Total input capacity | 1100 sheets |
| Total output capacity | 500 sheets |
| Maximum input capacity | 5100 sheets |
| Display | LCD |
| Maximum print size | 297 x 420 mm |
| Media types supported | Plain paper, envelopes, card stock, transparencies, paper labels |
| Media weight (tray 1) | Plain paper: 64 to 216 g/m2; Card stock: up to 199 g/m2 Index |
| Maximum ISO A-series paper size | A3 |
| Page description languages | PDF 1.5, PPDS |
| I/O ports | USB, Parallel, 1 internal solutions port (ISP) |
| Mac compatibility | Yes |
| Compatible operating systems | Windows, Linux, UNIX, Mac, NetWare and OS/400 |
| Recommended operating temperature range (T-T) | 16 - 32 °C |
| Sustainability certificates | ENERGY STAR |
| Power consumption (standby) | 9 W |
| Power consumption (printing) | 700 W |
| Power consumption (PowerSave) | 105 W |
| Bundled software | MarkVision Professional |
| Operating relative humidity (H-H) | 8 - 80 % |
Weight and Dimensions| Dimensions (WxDxH) | 616 x 520 x 475 mm |
|---|
