Installing a hard disk
32
Installing options
Installing a hard disk
Note: You need a small Phillips screwdriver to attach the hard disk to the mounting plate.
1 Remove the system board access panel. (See Accessing the printer system board.)
2 Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package.
3 Align the ribbon cable connector with the connector pins on the hard disk.
4 Attach the ribbon cable to the hard disk.
5 Align the screw holes on the mounting plate with the holes in the hard disk.
6 Secure the mounting plate to the hard disk with the screws.
Ribbon cable
Hard disk
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
