3 Firmly pull the colored tab to remove the staple
cartridge.
4 Use the metal tab to lift the staple guard, and
then pull out the sheet of staples.
Discard the entire sheet.
5 Remove any loose staples from the staple
guard.
6 Look through the clear covering on the bottom
of the cartridge holder to make sure no staples
are jammed in the entry throat.
7 Press down on the staple guard until it snaps
securely into place.
8 Push the cartridge holder firmly into the stapler
until the holder clicks into place.
9 Close Door G.
Priming Stapler appears on the operator
panel display. Priming ensures the stapler is
functioning properly.
To Previous Page
Loading...
