Lexmark X125 User Manual (English)

Other manuals for Lexmark X125

User Guide99 pages

Quick Reference35 pages

Service Manual88 pages

Questions and Answers:

T
Terri BrownAug 20, 2025
How to fix paper jam in Lexmark X125 All in One Printer?
- J
  Jane EdwardsAug 21, 2025
  If your Lexmark All in One Printer has a paper jam, it might be located in the document path or the paper path. Here's how to clear it: 1. Open the operator panel and remove any paper from the document path. 2. If paper remains jammed, open the cartridge access door and remove any paper from the paper path. 3. Close the cartridge access door, then firmly close the operator panel until it snaps into place. 4. Press Cancel/No.
G
Gary FosterAug 22, 2025
What to do if Lexmark X125 document does not print?
- B
  Bradley SolomonAug 22, 2025
  If your Lexmark All-In-One Printer isn't printing, check these: * Ensure the All-In-One is correctly connected to the computer, verifying cable connections. * Confirm cartridges are properly installed. * Remove any stickers or tape from the bottom of the print cartridges. * Use an undamaged USB cable. * Check if the print cartridge is out of ink. * Ensure the All-In-One is selected as the default printer.
B
Brandi MorganAug 25, 2025
Why are colors faded or not printing correctly on Lexmark X125 All in One Printer?
- Q
  qhardingAug 25, 2025
  If the colors are printing incorrectly or appear faded on your Lexmark All in One Printer, consider the following: * Check the ink levels on the Cartridges tab of the Print Control Program. The cartridge may be low or out of ink. * Try a different color setting. * Use a different brand of paper, as ink acceptance varies. * Install a new color cartridge. * Clean the cartridge nozzles. * Wipe the cartridge nozzles.
J
Jennifer GriffinAug 26, 2025
Why does Lexmark All in One Printer misfeed paper or feed multiple sheets?
- S
  satkinsonAug 26, 2025
  To prevent paper misfeeds or multiple sheets feeding in your Lexmark All-In-One Printer, ensure that: * You are using paper recommended for inkjet printers. * You are not forcing the paper into the All-In-One. * You are not loading too much paper. * You are loading the paper correctly. * The paper guide rests against the left edge of the paper without causing it to bow. * You have selected the correct paper type and size in the Settings dialog box.
B
Brooke HarveyAug 27, 2025
How to fix Lexmark X125 printing slowly?
- S
  Sarah BriggsAug 28, 2025
  If your Lexmark All in One Printer prints slowly: * Close any applications that are not currently in use. * Select 'Normal' or 'Draft' on the Quality/Color tab in the Settings dialog box. * Consider adding more RAM to your computer. Note that photos or documents with graphics may take longer to print than regular text.
M
Michele JohnsonAug 29, 2025
Why is print too dark or smudged on Lexmark X125 All in One Printer?
- J
  Jacob SullivanAug 29, 2025
  If the print quality is too dark or smudged on your Lexmark All in One Printer, make sure that: * You allow the ink to dry before handling the document. * You select the correct paper type and size in the Paper tab of the Settings dialog box. * The paper is straight and unwrinkled. * You select the appropriate print quality for the paper type. * You may need to clean the cartridge nozzles.
S
simsamyAug 31, 2025
Why are characters missing or unexpected on Lexmark X125 All in One Printer?
- M
  Michelle GarciaAug 31, 2025
  If characters are missing or unexpected when printing with your Lexmark All in One Printer: * Ensure the paper is loaded correctly and is a supported type. Try feeding one sheet at a time. * Make sure there are no hard-coded spaces at the left margin of your document. * Clean the cartridge nozzles. * Align the cartridges. * Ensure the All-In-One is selected as the default printer.
A
Allison RuizSep 2, 2025
How to fix vertical straight lines that are not smooth on Lexmark All in One Printer?
- J
  Jennifer BeckerSep 2, 2025
  To improve the print quality of vertical, straight lines in tables, borders, or graphs using your Lexmark All in One Printer: * Select 'Color' or 'Color Graphic' from the Quality/Color tab of the Settings dialog box. * Align the cartridges. * Clean the print nozzles.
L
Leonard SingletonSep 4, 2025
Why does Lexmark X125 print characters with white lines?
- L
  louisperrySep 4, 2025
  If you observe characters with white lines when printing with your Lexmark All in One Printer: * The print cartridge may be running out of ink. * Remove and reinstall the print cartridge. * You may need to clean the cartridge nozzles.
K
Kevin JohnsonSep 5, 2025
What to do if installation CD does not start for Lexmark All in One Printer?
- J
  Jennifer GeorgeSep 5, 2025
  If nothing happens when you insert the installation software CD for your Lexmark All in One Printer, try the following: Close all open programs, restart your computer, and make sure you click Cancel on any similar screens. You can also eject and reinsert the installation software CD. Alternatively, from your desktop, double-click My Computer, then double-click your CD-ROM drive icon, and if necessary, double-click setup.exe.

Lexmark X125 Specifications

General

Functions	Print, Copy, Scan
Print Technology	Inkjet
Scan Type	Flatbed
Color or Monochrome	Color
Type	All-in-One Printer
Scan Resolution	Up to 1200 x 1200 dpi
Connectivity	USB
Operating System Compatibility	Windows
Ink Type	Black and Color Ink Cartridges
Paper Handling	100-sheet input tray
Supported Media Sizes	Letter, Legal, A4, A5, B5, Envelopes
Weight	11.9 lbs