Diagnostic Aids 3-7
4400-001
Remote RCV Code
The remote receive code lets you initiate fax received from an
extension phone plugged into the EXT jack. If you pick up the
extension phone and hear fax tones, enter the remote receive code
and the fax starts receiving. The password is preset to 9.
1. Press Setup.
2. Press Menu until ‘Remote RCV Code’ displays on the top line.
3. Enter the desired code 0 to 9 on the number keypad.
ECM (Error Correction Mode)
This mode compensates for poor line quality and ensures accurate,
error-free transmission with another ECM-equipped facsimile
machine. If the line quality is poor, transmission time may be
increased when ECM is enabled.
1. Press Setup.
2. Press Menu until ‘ECM Mode’ displays.
3. Press Start or Setup when Yes is displayed to turn on the Error
Correction Mode. Press Start or Setup when No is displayed to
turn off the Error Correction Mode.
Auto Reduction
When receiving a document as long or longer than the paper
installed in your machine, the machine can reduce the data in the
document to fit into your recording paper size.
Turn on this feature if you want to reduce an incoming page that may
otherwise need to be divided into two pages with only a small portion
on the second page. If the fax machine cannot reduce the data to fit
one page with the feature enabled, the data is divided and printed in
actual size on two or more sheets.
1. Press Setup.
2. Press Menu until ‘Auto Reduction’ displays. To turn only the
vertical reduction feature On, press Start or Setup when On is
displayed. The machine reduces an incoming page containing
overflow data only in vertical. Press Start or Setup when Off is
displayed to turn this feature on.
To Next Page
Loading...
