Functions disabled transitional messages
110
Understanding MFP messages
Functions disabled transitional messages
298.01 Scanner Missing –
Cable Unplugged
The MFP detects after powering on
that the front side scanner cable is
unplugged.
1 Turn the MFP off.
2 Plug the front side scanner cable into its
connector.
3 Turn the MFP on.
298.02 Scanner Missing –
Cable Unplugged
The MFP detects after powering on
that the back side scanner cable is
unplugged.
1 Turn the MFP off.
2 Plug the back side scanner cable into its
connector.
3 Turn the MFP on.
Occurrence Message Information
A function is disabled. A user
enters a shortcut for the function.
<Function name> turned off by
system administrator
The message appears for 3 seconds, and
then the previous screen appears.
The USB on the front of the control
panel is turned off. A user inserts a
USB cable in the slot.
USB turned off by system
administrator.
The message appears for 3 seconds, and
then the previous screen appears.
Message Meaning Action
To Next Page
Loading...
