Status messages
94
Understanding MFP messages
Tray [x] Empty x represents the number of the tray.
The tray has no print media installed.
1 Remove the tray. The message clears.
2 Install print media in the tray according to the User’s
Guide.
3 Insert the tray.
Tray [x] Low x specifies the number of the tray
that is low.
Load print media into the specified tray to clear the
message.
Tray [x] Missing x represents the number of the tray
missing from the MFP.
The message is on the Menu
Settings Page also.
Insert the tray to clear the message.
Waiting The MFP receives a page of data to
print but waits for an End of Job
command, a Form Feed command,
or additional data.
Press Stop. Touch Continue to print the contents of
the buffer.
Cancel the current job.
Wait for the message to clear.
Message Meaning Action
To Next Page
Loading...
