Lexmark X644E User Manual (English)

Other manuals for Lexmark X644E

User Guide312 pages

Menus And Messages Guide120 pages

Technical Reference Guide416 pages

Questions and Answers:

L
Lisa WhiteSep 5, 2025
Why does Lexmark All in One Printer print incorrect characters?
- M
  Michelle LeonardSep 6, 2025
  Incorrect characters printing on your Lexmark All in One Printer can be caused by: * Using an incompatible parallel cable. If using a parallel interface, ensure you are using an IEEE 1284-compliant parallel cable. Lexmark part number 1329605 (10 ft) or 1427498 (20 ft) is recommended for the standard parallel port. * The printer being in Hex Trace mode. If 'Ready Hex' appears on the display, you must exit Hex Trace mode before printing. Turn the printer off, wait 10 seconds, and then turn it back on.
F
fblankenshipSep 4, 2025
Why Lexmark All in One Printer prints from the wrong tray?
- D
  Deborah PriceSep 4, 2025
  If your Lexmark All in One Printer prints from the wrong tray or on the wrong paper, the control panel menu settings may not match the media loaded in the tray. Make sure the Paper Size and Paper Type specified in the printer driver match the paper size and type in the tray.
J
Jill CarlsonAug 25, 2025
Why does my Lexmark All in One Printer paper frequently jam?
- T
  teresa94Aug 25, 2025
  Frequent paper jams in your Lexmark All in One Printer can occur due to several reasons: * The paper you are using might not meet the printer's specifications. Use recommended paper and specialty media. * You may have loaded too much paper or too many envelopes. Ensure the stack of paper does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder. * The guides in the selected tray might not be set correctly for the paper size loaded. Move the guides in the tray to the correct position. * The paper could have absorbed moisture due to high humidity. Load paper from a fresh package and store paper in its original wrapper until you load it. * The pick rolls may be worn and need replacement.
V
vkingSep 3, 2025
Why does Lexmark All in One Printer job take longer than expected to print?
- E
  Erin RosalesSep 3, 2025
  If your Lexmark All in One Printer job is taking longer than expected to print, it could be due to: * The job being too complex. Reduce the complexity by minimizing the number and size of fonts, the number and complexity of images, and the number of pages. * Page Protect being set to On. Set Page Protect to Off under Settings Æ General Settings Æ Print Recovery.
S
stacytownsendSep 2, 2025
What to do if the control panel display is blank on Lexmark All in One Printer?
- T
  Terry BassSep 2, 2025
  If the control panel display on your Lexmark All in One Printer is blank, turn the printer off, wait about 10 seconds, and then turn it back on. If the 'Ready' message does not appear, turn the printer off and call for service.
M
Michael PaulSep 1, 2025
How to fix Lexmark All in One Printer that is not responding?
- G
  glarsenSep 1, 2025
  If your Lexmark All in One Printer is not responding, turn it off, wait at least 10 seconds, and then turn it back on. This often resolves the issue.
K
Kimberly LevyAug 31, 2025
How to fix long fax transmission times on Lexmark X644E?
- A
  Ashley MitchellAug 31, 2025
  To reduce fax transmission time, touch Options, then under Content, change the setting to Text, and then set the resolution to Standard.
B
Breanna Russell MDAug 30, 2025
Why are the images on my Lexmark X644E All in One Printer faxes not clear?
- D
  David PerezAug 30, 2025
  To improve the clarity of images on your sent faxes, go to Options, then under Content, change the setting to Text/Photo or Photo. You can also increase the output resolution. Keep in mind that this will increase the scan time but enhance the fax output quality.
E
Ethan HernandezAug 29, 2025
Why Lexmark All in One Printer multiple pages feed into the ADF?
- M
  Michael HawkinsAug 29, 2025
  If multiple pages feed into the ADF of your Lexmark All in One Printer, the separator roll may be worn. Replace the separator roll.
J
jeffreywarrenAug 28, 2025
Why Lexmark All in One Printer original documents misfeed in the ADF?
- U
  uadamsAug 28, 2025
  If original documents misfeed in the ADF of your Lexmark All in One Printer, the guides are not adjusted properly. Adjust the guides toward the media until they lightly rest against the edge of the media.

Lexmark X644E Specifications

General

Print Technology	Laser
Functionality	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Max Copying Resolution	600 x 600 dpi
Grayscale Half-Tones	256
Max Scanning Resolution	600 x 600 dpi
PC Connection	USB, Ethernet
Fax Modem Speed	33.6 Kbps
Fax Resolution	300 x 300 dpi
Maximum Paper Size	Legal
Duplex Printing	Yes
Operating Systems Supported	Windows, Mac OS, Linux
Monthly Duty Cycle (max)	200000 pages
Media Type	Envelopes, Labels, Plain Paper, Transparencies
First Page Out Time	6.5 seconds
Network Connectivity	Ethernet
Connectivity	USB, Ethernet