Action Yes No
Step 8
a Remove, and then insert the waste toner bottle.
b Perform Color Adjust.
From the home screen, touch Settings > Print > Quality >
Advanced Imaging > Color Adjust.
Is the print light?
Go to step 9. The problem is
solved.
Step 9
a Remove the imaging kit, and then remove the imaging unit.
Warning—Potential Damage: Do not expose the imaging kit
and imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drum under the imaging kit. Doing so may
aect the quality of future print jobs.
b Insert the imaging unit, and then insert the imaging kit.
c Print the document.
Is the print too light?
Contact
customer
support.
The problem is
solved.
Mottled print and dots
Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, touch Settings >
Troubleshooting > Print Quality Test Pages.
Troubleshooting 210
To Next Page
Loading...
