Lexmark XM1242 - Page 77

Menu item Description
E‑mail Alerts Setup
Primary SMTP Gateway
Primary SMTP Gateway Port (25*)
Secondary SMTP Gateway
Secondary SMTP Gateway Port (25*)
SMTP Timeout (30 seconds*)
Reply Address
Always use SMTP default Reply Address
(O*)
Use SSL/TLS (Disabled*)
Require Trusted Certificate (On*)
SMTP Server Authentication (No authentication
required*)
Device‑Initiated E‑mail (None*)
User‑Initiated E‑mail (None*)
Use Active Directory Device Credentials
(O*)
Device Userid
Device Password
Kerberos 5 REALM
NTLM Domain
Disable “SMTP server not set up” error
(O*)
Configure the printer to send e‑mail alerts to a list of contacts
when the printer requires user intervention.
E‑mail Alerts Setup
Setup E‑mail Lists and Alerts
E‑mail List 1
E‑mail List 2
Subject Text
E‑mail Events
Specify the e‑mail addresses and enable the e‑mail alert
events.
Note: This menu item appears only in the Embedded Web
Server.
Error Prevention
Jam Assist
O
On*
Set the printer to flush automatically blank pages or pages with
partial prints after a jammed page is cleared.
Error Prevention
Auto Continue
Enabled
5–255 (5*)
Let the printer to continue processing or printing a job
automatically after clearing certain attendance conditions.
Error Prevention
Auto Reboot
Auto Reboot
Reboot when idle
Reboot always*
Reboot never
Set the printer to restart when an error occurs.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 77