b
If the A5 length guide is still attached to the length guide,
then remove it from its place. If the A5 length guide is not
attached, then proceed to step d.
c
Put the A5 length guide in its holder.
2
1
d
Squeeze, and then slide the length guide to the correct
position for the paper size you are loading.
L
G
L
O
F
C
F
O
L
I
O
LT
R
A
4
A
5
3
Flex the sheets back and forth to loosen them, and then fan
them. Do not fold or crease the paper. Straighten the edges on
a level surface.
4
Load the paper stack with the printable side facedown for
one
‑
sided printing.
•
Make sure the paper is loaded properly.
One‑sided printing Two‑sided (duplex) printing
ABC
ABC
10
To Next Page
Loading...
