•
Make sure the paper is below the solid line, which is the
maximum paper fill indicator.
Warning—Potential Damage: Overfilling the tray can
cause paper jams.
•
When using card stock, labels, or other types of specialty
media, make sure the paper is below the dashed line, which
is the alternate paper
fill
indicator.
6
For custom
‑
or Universal
‑
size paper, adjust the paper guides
to lightly touch the sides of the stack, and then lock the length
guide.
7
Insert the tray.
8
From the printer control panel, set the paper size and paper
type in the Paper menu to match the paper loaded in the tray.
Note: Set the correct paper size and type to avoid paper
jams and print quality problems.
Loading the 2100‑sheet tray
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Pull out the tray completely.
2
Adjust the width and length guides.
8
To Next Page
Loading...
