Unlock
1. When the padlock is in standby, put the registered fingerprint on the fingerprint reader, the blue
light will turn on and the padlock will beep twice.
If the fingerprint is incorrect, the light will turn red and the padlock will beep 3 times.
Reset
If you want to set new administrator account or delete accounts, please reset the fingerprint
padlock firstly, and then set new accounts.
1. Press and hold your finger on the fingerprint reader for about 8 seconds. Release your finger as
soon as the red light starts flashing
2. Put the administrator account’s finger on the fingerprint reader. The light will turn red the
padlock will emit a long beep to confirm the success of the operation.
Notice: When the resetting is successful, you can use any finger to unlock. Please remember to
set administrator account firstly, then use the padlock. All the accounts’ fingerprint will delete
after resetting.
To Next Page