SAFETY PRECAUTIONS
Read all the instructions before using the device
The factory setting of all new Nomaday lock will allow any fingerprint to open it.
Make sure to register an administrator for the newly installed lock. The lock cannot register
normal users without an administrator.
Please recharge the battery promptly when the lock indicates low battery power.
Please keep your finger clean when touching the fingerprint panel.
Do not attempt to dissemble the smart lock by yourself.
Do not use any inappropriate tools that can cause damages or malfunction to your lock.
Keep it far away from the flammable and explosive gas.
Make sure the adaptor output is 5V when charging.
The LED remains off when
you press the fingerprint
panel
Make sure to charge the
fingerprint padlock
Your finger is too wet or dirty
Make sure your finger is
clean and dry. Place it on the
fingerprint reader again
Fingerprint reader not clean
Clean the fingerprint reader
with a dry cloth
Any finger can unlock the
padlock
No administrator account
has been created yet
Set the administrator account
To Next Page