122
2-1. Driving procedures
ES350_U_(L/O_0802)
Turn signal lever
n Turn signals can be operated when
The “ENGINE START STOP” switch is in IGNITION ON mode.
n If the indicators flash faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned out.
Left turn
Right turn
Move and hold the lever part-
way to signal a lane change
The left hand signal will flash
until you release the lever.
Move and hold the lever part-
way to signal a lane change
The right hand signal will flash
until you release the lever.
ES350_U_33809U.book Page 122 Wednesday, January 30, 2008 10:58 AM
To Next Page
Loading...
