44
1-3. Adjustable components (seats, mirrors, steering wheel)
ES350_U_(L/O_0802)
Driving position memory (if equipped)
Your preferred driving position (the position of the driver's seat, steering
wheel and outside rear view mirrors) can be memorized and recalled with
the touch of a button. It is also possible to set this function to activate auto-
matically when the doors are unlocked.
Two different driving positions can be entered into memory.
n Entering a position to memory
Check that the shift lever is set in P.
Turn the “ENGINE START STOP” switch to IGNITION ON
mode.
Adjust the driver’s seat, steering wheel, and outside rear view
mirrors to the desired positions.
While pushing the SET button,
push button 1 or 2 until the sig-
nal beeps.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
n Recalling the memorized position
Check that the shift lever is set in P.
Turn the “ENGINE START STOP” switch to IGNITION ON
mode.
Push button 1 or 2 to recall the
memorized position.
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
ES350_U_33809U.book Page 44 Wednesday, January 30, 2008 10:58 AM
To Next Page
Loading...
