306
4-3. Do-it-yourself maintenance
ES350_U_(L/O_0802)
Wipe the dipstick and reinsert it fully.
Low
Full
n Adding engine oil
If the oil level is below or near the
low level mark, add engine oil of
the same type as already in the
engine.
Make sure to check the oil type and prepare the items needed before
adding oil.
Remove the oil filler cap.
Add engine oil slowly, checking the dipstick.
Install the filler cap, turning it clockwise.
It takes about 1.6 qt. (1.5 L, 1.3 lmp. qt.) to raise the oil level from low to full on the
dipstick.
STEP 6
Oil grade ILSAC multi-grade engine oil
Items Clean funnel
STEP 1
STEP 2
STEP 3
ES350_U_33809U.book Page 306 Wednesday, January 30, 2008 10:58 AM
To Next Page
Loading...
