Lexus ES300 - Garage Door Opener (HomeLink)

Finish
INTERIOR EQUIPMENT
71
GARAGE DOOR OPENER
The garage door opener (HomeLink
R
Universal
Transceiver) is manufactured under license from
HomeLink
R
and can be programmed to operate garage
doors, gates, entry doors, door locks, home lighting
systems, and security systems, etc.
(a) Programming the HomeLink
R
"
1
Indicator light
2
Buttons
The HomeLink
R
in your vehicle has 3 buttons and you can
store one program for each button.
To ensure correct programming into the HomeLink
R
, install a
new battery in the hand−held transmitter prior to programming.
The battery side of the hand−held transmitter must be pointed
away from the HomeLink
R
during the programming process.
For Canadian users, follow the procedure in “Programming an
entrance gate/Programming all devices in the Canadian
market”.
1. Decide which of 3 HomeLink
R
buttons you want to program.
2. Place your hand−held garage transmitter 25 to 75 mm (1 to
3 in.) away from the surface of the HomeLink
R
.
Keep the indicator light on the HomeLink
R
in view while
programming.
3. Simultaneously press and hold the hand−held garage
transmitter button along with the selected HomeLink
R
button.
4. When the indicator light on the HomeLink
R
changes from a
slow to a rapid flash after 20 seconds, you can release both
buttons.
5. Test the operation of the HomeLink
R
by pressing the newly
programmed button. If programming a garage door opener,
check to see if the garage door opens and closes.