Lexus ES300h - Page 137

ES300h_OM_OM33B71U_(U)
137
3-3. Adjusting the seats
3
Operation of each component
■ Installing the head restraints
 Front seats
 Rear seats
■ Adjusting the height of the head restraints
■ Adjusting the rear seat head restraint
Always raise the head restraint one level from the stowed position when using.
Align the head restraint with the installation
holes and push it down to the lock position.
Press and hold the lock release button when
lowering the head restraint.
Align the head restraint with the installation
holes and push it down to the lowest lock posi-
tion while pressing the lock release button.
Make sure that the head restraints are adjusted
so that the center of the head restraint is closest
to the top of your ears.
WA R NI N G
■ Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to do so may
result in death or serious injury.
● Use the head restraints designed for each respective seat.
● Adjust the head restraints to the correct position at all times.
● After adjusting the head restraints, push down on them and make sure they are
locked in position.
● Do not drive with the head restraints removed.
Lock release button
Lock release button