496
8-2. Steps to take in an emergency
ES300h_OM_OM33B71U_(U)
Take out the towing eyelet. (P. 509)
Remove the eyelet cover using a flat-
head screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehi-
cle body as shown in the illustration.
Insert the towing eyelet into the hole
and tighten partially by hand.
Tighten down the towing eyelet
securely using a wheel nut wrench.
Securely attach cables or chains to the towing eyelet.
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the hybrid system.
If the hybrid system does not start, turn the power switch to ON mode.
Shift the shift position to N and release the parking brake.
When the shift lever cannot be shifted: P. 520
Emergency towing procedure
1
To Next Page
Loading...
