Lexus GX470 2006 - Erasing the Entire Homelink Memory (All Three Programs); Operating the Homelink; Programming Other Devices; Reprogramming a Button

INTERIOR EQUIPMENT
88
Programming other devices
To program other devices such as home security systems,
home door locks or lighting, contact your authorized Lexus
dealer for assistance.
Reprogramming a button
Individual HomeLink
R
buttons cannot be erased, however, to
reprogram a single button, follow the procedure “Programming
the HomeLink
R
”.
(b) Operating the HomeLink
R
To operate the HomeLink
R
, press the appropriate HomeLink
R
button to activate the programmed device. The HomeLink
R
indicator light should come on. The HomeLink
R
continues to
send the signal for up to 20 seconds as long as the button is
pressed.
(c) Erasing the entire HomeLink
R
memory (all
three programs)
To erase all previously programmed codes at one time, press
and hold down the 2 outside buttons for 20 seconds until the
indicator light flashes.
If you sell your vehicle, be sure to erase the programs stored
in the HomeLink
R
memory.
CAUTION
D When programming the HomeLink
R
Universal
Transceiver, you may be operating a garage door or
other device. Make sure people and objects are out
of the way of the garage door or other device to
prevent potential harm or damage.
Information Provided by: