Lexus IS300h - HV Battery Removal: Accessing via Seat Removal

13. REMOVE REAR SEAT CUSHION
ASSEMBLY
(1) Lift up the front edge of the rear seat cushion
assembly as shown in the illustration and
disengage the 2 hooks on the front side of
the rear seat cushion frame from the rear seat
cushion lock hooks.
Notice:
Be sure to hold the part of the seat cushion
assembly directly next to the rear seat
cushion lock hooks when lifting it up.
Lifting a different part of the cushion may
deform the rear seat cushion frame.
Rear Seat
Cushion Frame
Hoo
k
a
a: 100 mm (3.94 in.) or less
(2) Disengage the 2 hooks on the rear side of the
rear seat cushion frame from the child
restraint seat anchor bracket hooks.
24
Rear Seat Inner Belt Assembly
Rear No. 1 Seat Inner
Belt Assembly
Rubber Band
(3) Pass the rear seat inner belt assembly
through the rubber band of the rear seat
cushion assembly.
(4) Pass the 2 rear seat inner belts through the
rear seat cushion assembly and remove the
rear seat cushion assembly.
14. REMOVE REAR SEAT HEADREST
ASSEMBLY
(1) Remove the 2 rear seat headrest assemblies.
15. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY
16. REMOVE REAR SEATBACK ASSEMBLY
(for Fixed Seat Type)
(1) Remove the 4 bolts.
(2) Disengage the 3 hooks.