73
LC500_LC500h_QG_OM11444U_(U)
Follow the procedure below to display the audio control screen.
Using the audio control switch
Press the “RADIO” or “MEDIA” button.
Using the Remote Touch
Press the “MENU” button on the Remote Touch, then select “Radio” or “Media”.
Please refer to P.58 for the Remote Touch operation.
Using the audio control switch
1 Display the audio control screen.
2 Each time the “RADIO” or “MEDIA”
button is pressed, the audio source
changes.
“RADIO” button: To change radio
modes.
“MEDIA” button: To change media
modes.
From the audio source selection screen
1 Display the audio control screen.
2 Select “Source”.
3 Select the desired source.
Audio System
Audio control screen
Selecting an audio source
To Next Page
Loading...
