Although the receiver cap cover has a string-type piece that holds it to the vehicle when it
is removed, it is always a good idea to remove the assembly completely from the bumper.
Stow the receiver cap in the vehicle either in the trunk, where the eyelet was stowed, or in
a cup holder in the center console, so that it does not blow off the vehicle or get lost
during transport.
Attach your winch line hook to the eyelet ensuring there is no contact between the hook
and the painted surface. Leave the winch line attached to the installed towing eyelet
throughout the loading, transporting and unloading processes.
To Next Page
Loading...
