552
3-5. Using the hands-free system (for cellular phone)
■ Changing the handsfree power
The Bluetooth
phone is automatically connected when you turn the
“ENGINE START STOP” switch to ACCESSORY or IGNITION ON
mode. You can change this state to “On” or “Off”.
Display the “Bluetooth* Information” screen. (P. 551)
Touch “Handsfree Power” on the “Bluetooth* Information”
screen.
Touch “On” or “Off”, and then
“Save”.
*: Bluetooth is a registered trademark of Bluetooth SIG. Inc.
■ Editing the device name
Display the “Bluetooth* Information” screen. (P. 551)
Touch “Edit” of “Device Name” on the “Bluetooth* Information”
screen.
Input the device name, and touch “OK”.
Touch “Save” on the “Bluetooth* Information” screen.
*: Bluetooth is a registered trademark of Bluetooth SIG. Inc.