660
4-3. Do-it-yourself maintenance
Push and hold the tire pressure
warning reset switch until the tire
pressure warning light blinks
slowly 3 times and a message
appears on the multi-information
display.
The switch is under the driver's side
instrument panel, facing the floor
above the accelerator pedal.
Wait a few minutes for the multi-information display to show the
tire inflation pressures (5 tires), and turn the “ENGINE START
STOP” switch OFF.
Registering ID codes
The tire pressure warning valve and transmitter is equipped with a unique
ID code. When replacing a tire pressure warning valve and transmitter, it
is necessary to register the ID code of tire pressure warning valve and
transmitter. Have the ID code registered by your Lexus dealer.
To Next Page
Loading...
