159
2
When driving
LS460_BRAZIL_08_(L/O_0712)
2-3. Operating the lights and windshield wipers
Headlight switch
Turning on the high beam headlights
With the headlights on, push the
lever away from you to turn on
the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you to turn
on the high beams.
Release to turn them off. You can
flash the high beams with the head-
lights on or off.
The headlights can be operated manually or automatically.
The front position, tail,
license plate and instru-
ment panel lights turn on.
The headlights and all
lights listed above turn
on.
The headlights and front
position lights turn on
and off automatically.
(When the “ENGINE
START STOP” switch is
in IGNITION ON
mode)
LS460_BZ_08.book 159 ページ 2007年10月18日 木曜日 午前11時18分