70
1-3. Adjustable components (seats, mirrors, steering wheel)
LS460_BRAZIL_08_(L/O_0712)
Driving position memory
Your preferred driving position (the position of the driver's seat and steer-
ing wheel, angle of the outside rear view mirrors and height of seat belt)
can be memorized and recalled with the touch of a button. It is also possible
to set this function to activate automatically when the doors are unlocked.
Three different driving positions can be entered into memory.
■ Entering a position to memory
Check that the shift lever is set in P.
Switch to IGNITION ON mode.
Adjust the driver’s seat, steering wheel, outside rear view mir-
rors and seat belt height to the desired positions.
While pushing the SET button,
press button 1, 2 or 3 until the
signal beeps.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
■ Recalling the memorized position
Check that the shift lever is set in P.
Switch to IGNITION ON mode.
Press button 1, 2 or 3 to recall
the memorized position.
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
LS460_BZ_08.book 70 ページ ２００７年１０月１８日 木曜日 午前１１時１８分
To Next Page
