411
4-5. Using the driving support systems
4
Driving
LS600h/LS600hL_EE(OM50D61E)
The Blind Spot Monitor function uses radar sensors to detect vehi-
cles that are traveling in an adjacent lane in the area that is not
reflected in the outside rear view mirror (the blind spot), and
advises the driver of the vehicles existence via the outside rear view
mirror indicator.
The areas that vehicles can be detected in are outlined below.
The range of the detection area
extends to:
Approximately 3.5 m (11.5 ft.)
from the side of the vehicle
The first 0.5 m (1.6 ft.) from the
side of the vehicle is not in the
detection area
Approximately 3 m (9.8 ft.)
from the rear bumper
Approximately 1 m (3.3 ft.)
forward of the rear bumper
The Blind Spot Monitor function
The Blind Spot Monitor function detection areas
To Next Page
Loading...
