KEYS AND DOORS
14
− Reorient or relocate the receiving antenna.
− Increase the separation between the equipment and
receiver.
− Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
− Consult the dealer or an experienced radio / TV
technician for help.
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
For vehicles sold in Canada
This device complies with RSS−210 of Industry Canada.
Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device
must accept any interference, including interference that
may cause undesired operation of the device.
Replacing the battery
When you replace the battery, prepare a lithium battery CR1616 and
a special screwdriver.
CAUTION
Special care should be taken that small children do not
swallow the removed battery or components.
NOTICE
When replacing the battery, be careful not to lose the
components, screws and O−ring.
11L028−1
1. Remove the screw, and then the cover while pushing it in the
arrow direction.
To Next Page
Loading...
