Lexus RC300 - Page 216

216
8-1. Phone operation (Hands-free system for cellular phones)
To use the hands-free system for cellu-
lar phones, it is necessary to register a
cellular phone with the system. (P.41)
■ Connecting a Bluetooth
®
device
 Registering an additional device
1 Display the phone screen:
 “MENU” button  “Phone”
2 Select “Select Device” on the
sub menu.
3 Select “Add Device”.
 When another Bluetooth
®
device is
connected, a confirmation screen
will be displayed. To disconnect the
Bluetooth
®
device, select “Yes”.
 Up to 5 Bluetooth
®
devices can be
registered to the system. If the maxi-
mum number of devices are regis-
tered, registration cannot be
performed from the phone top
screen.
4 Follow the steps in “Registering a
Bluetooth
®
phone for the first time”
from step 5. (P.41)
 Selecting a registered device
1 Display the phone screen:
 “MENU” button  “Phone”
2 Select “Select Device” on the
sub menu.
3 Select the desired device to be
connected.
4 Check that a confirmation screen is
displayed when the connection is
complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
■ Bluetooth
®
phone condition dis-
play
The condition of the Bluetooth
®
phone
appears on the upper right side of the
screen. (P.19)
WARNING
● Before using Bluetooth
®
devices,
users of any electrical medical device
other than implantable cardiac pace-
makers, cardiac resynchronization
therapy-pacemakers or implantable
cardioverter defibrillators should con-
sult the manufacturer of the device for
information about its operation under
the influence of radio waves. Radio
waves could have unexpected effects
on the operation of such medical
devices.
NOTICE
● Do not leave your cellular phone in the
vehicle. In particular, high tempera-
tures inside the vehicle may damage
the cellular phone.
Registering/Connecting a Blue-
tooth
®
phone