Lexus RC300 - What to Do if; Troubleshooting

242
8-3. What to do if...
8-3.What to do if...
■ When using the hands-free system
with a Bluetooth
®
device
The hands-free system or Bluetooth
®
device does not work.
■ When registering/connecting a
cellular phone
A cellular phone cannot be registered.
A Bluetooth
®
connection cannot be
made.
Troubleshooting
If you notice any of the following
symptoms, refer to the likely cause
and the solution, and re-check.
Troubleshooting
Likely cause Solution
The connected
device may not be a
compatible Blue-
tooth
®
cellular
phone.
For a list of specific
devices which oper-
ation has been con-
firmed on this
system, check with
your Lexus dealer or
the following web-
site:
http://
www.lexus.com/
MobileLink
The Bluetooth
®
ver-
sion of the con-
nected cellular
phone may be older
than the specified
version.
Use a cellular phone
with Bluetooth
®
version 2.0 or higher
(recommended: Ver.
4.2 or higher).
(P.44)
Likely cause Solution
An incorrect pass-
code was entered on
the cellular phone.
Enter the correct
passcode on the cel-
lular phone.
The registration
operation has not
been completed on
the cellular phone
side.
Complete the regis-
tration operation on
the cellular phone
(approve registra-
tion on the phone).
Old registration
information remains
on either this system
or the cellular
phone.
Delete the existing
registration informa-
tion from both this
system and the cellu-
lar phone, then reg-
ister the cellular
phone you wish to
connect to this sys-
tem. (P.49)
Likely cause Solution
Another Blue-
tooth
®
device is
already connected.
Manually connect
the cellular phone
you wish to use to
this system. (P.46)
Bluetooth
®
function
is not enabled on the
cellular phone.
Enable the Blue-
tooth
®
function on
the cellular phone.
Automatic Blue-
tooth
®
connection
on this system is set
to off.
Set automatic Blue-
tooth
®
connection
on this system to on
when the engine
switch is in ACCES-
SORY or IGNI-
TION ON mode.
(P.51)