55
2-2. Connectivity settings
2
Basic function
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi
*
” on the sub
menu.
*
:Wi-Fi
®
is a registered trademark of
Wi-Fi Alliance
®
.
4 Select the desired item to be set.
Select to enable/disable the Wi-Fi
®
Hotspot function. (P.56)
Select to check/change the access
point password. (P.56)
Select to display hints for connect-
ing to the vehicle via Wi-Fi
®
.
Select to make the access point
searchable/unsearchable.
Select to check/change the secu-
rity protocol of the access point (for
authentication and encryption).
(P.56)
Select to change the access point
name (SSID). (P.57)
Select to change the Wi-Fi
®
con-
nection channel (within the
2.4GHz frequency band). (P.57)
● If any settings have been changed, it will
be necessary to reset the Wi-Fi
®
system
to complete the changes. To reset the
Wi-Fi
®
system, select “Yes” on the
pop-up displayed after changing the set-
tings.
Changing the Wi-Fi
®
settings
To Next Page
Loading...
