132
4-1. Basic operation
connection is established, the other USB
port can be used only for device battery
charger.
*
: This function is not made available in
some countries or areas.
1 Display the audio control screen.
2 Select “Sound” on the sub
menu.
3 Select the desired item to be set.
Select to set the treble/mid/bass.
(P.132)
Select to set the fader/balance.
(P.132)
The system adjusts to the optimum
volume and tone quality according
to vehicle speed to compensate for
increased vehicle noise. (P.133)
This function can create a feeling of
presence. (P.133)
■ Treble/Mid/Bass
How good an audio program sounds is
largely determined by the mix of the
treble, mid and bass levels. In fact, dif-
ferent kinds of music and vocal pro-
grams usually sound better with
different mixes of treble, mid and bass.
1 Select “Treble/Mid/Bass” and
select the desired item to be set.
Select “+” or “-” to adjust
high-pitched tones.
Select “+” or “-” to adjust
mid-pitched tones.
Select “+” or “-” to adjust
low-pitched tones.
■ Fader/Balance
A good balance of the left and right
stereo channels and of the front and
rear sound levels is also important.
Keep in mind that when listening to a
stereo recording or broadcast, chang-
ing the right/left balance will increase
the volume of 1 group of sounds while
decreasing the volume of another.
● Depending on the size and shape of
the device that is connected to the sys-
tem, the console box may not close
fully. In this case, do not forcibly close
the console box as this may damage
the device or the terminal, etc.
Sound settings
To Next Page
Loading...
