166
4-5. Setup
*
: 10.3-inch display model
1 Display the audio settings screen:
“MENU” button “Setup”
“Audio”
2 Select “DVD”.
3 Select the desired items to be set.
Select to change the audio lan-
guage. (P.166)
Select to change the subtitle lan-
guage. (P.166)
Select to change the language of
the DVD video menu. (P.166)
Select to set the angle mark on/off.
Select to set the parental level.
(P.167)
Select to set the auto start playback
on/off.
Discs that are inserted while the
vehicle is in motion will automati-
cally start playing. Certain discs
may not play.
Select to set a dynamic range.
(P.167)
Select to initialize all menus.
1 Select “Audio Language”.
2 Select the desired language to be
heard.
If the desired language to be heard
cannot be found on this screen,
select “Other” and enter a language
code. (P.167)
1 Select “Subtitle Language”.
2 Select the desired language to be
read.
If the desired language to be read
cannot be found on this screen,
select “Other” and enter a language
code. (P.167)
1 Select “Menu Language”.
2 Select the desired language to be
read.
If the desired language to be read
cannot be found on this screen,
select “Other” and enter a language
code. (P.167)
DVD settings
*
Audio language
Subtitle language
Menu language