Lexus RC350 - Page 185

185
5-1. Voice command system operation
5
Voice command system
The voice command system is oper-
ated by saying commands which cor-
respond to a supported function. To
display examples of commands for
supported functions, select a function
button on the screen after starting the
voice command system.
1 Press the talk switch.
 Voice guidance for the voice com-
mand system can be skipped by
pressing the talk switch.
2 If “Getting Started with Voice”
screen is displayed, select “OK” or
press the talk switch. (P.186)
3 After hearing a beep, say a sup-
ported command.
 To display sample commands of the
desired function, say the desired
function or select the desired func-
tion button. To display more com-
mands, select “More Commands”.
 Selecting “Help” or saying “Help”
prompts the voice command system
to offer examples of commands and
operation methods.
 Registered POIs, registered names
in the contacts list etc., can be said in
the place of the “<>” next to the com-
mands. (P.188)
For example: Say “Find a restaurant”, “Call
John Smith” etc.
 If a desired outcome is not shown, or
if no selections are available, say
“Go back” to return to the previous
screen.
 To cancel voice recognition, select
, say “Cancel”, or press and hold
the talk switch.
 To perform the voice command
operation again, select “Start Over”
or say “Start over”.
 To suspend voice command opera-
tion, select “Pause” or say “Pause”.
To resume the voice command
operation, select “Resume” or press
the talk switch.
● If the system does not respond or the
confirmation screen does not disappear,
press the talk switch and try again.
● If a voice command cannot be recog-
nized, voice guidance will say “Sorry,
could you repeat that?” and voice com-
mand reception will restart.
● If a voice command cannot be recog-
nized 3 consecutive times, voice recogni-
tion will be canceled.
● The amount of spoken feedback received
from the system while using the voice
command system (voice recognition
prompts) can be changed on the voice
NOTICE
● Do not touch and put a sharp object to
the microphone. It may cause failure.
Voice command system opera-
tion
Operation from the main menu