Lexus RX350 - Page 130

130
3-3. Adjusting the seats
switch (luggage compartment): The rear
seatback is in a position within the range
shown in the illustration with the back
door open
● The other seat operation switch for the
seat to be operated is not being pressed.
■ The rear seatbacks can be raised when
(power seat)
When all of the following conditions are
met, a rear seat operation switch can be
used to return the rear seatback:
● When using the rear seat operation
switch (rear seat): The rear seatback is in
a position within the range shown in
the illustration with the back door open
( is where the rear seatback is at its
most upright position)
● When using the rear seat operation
switch (rear seat): The rear door nearest
to the seat to be operated is open
● The other seat operation switch for the
seat to be operated is not being pressed.
■ Precautions for power seats (if
equipped)
If a seat cover or seat cushion is used on a
power seat, the power seat may not operate
properly.
Before folding the seatback of a power seat,
make sure that the seat and area around the
seat is free of obstructions which may inter-
fere the operation.
■ Rear seatback jam protection function
(power seat)
When folding or returning the seatback of a
power seat, if an object is detected between
the seatback and seat cushion or behind the
seatback, the seatback may stop or move in
the opposite direction slightly.
A buzzer will sound continuously when the
seatback stops and intermittently when
moving in the opposite direction.
■ Before folding the second-row seat
seatbacks
1 To prevent the seat belt from being
damaged, hook it to the seat belt
hanger.
2 Stow the center seat seat belt
buckle.
3 Lower the second-row seat head
restraints to the lowest position.
(P.137)
B
A
B
Folding the second-row seat
seatbacks (RX350L)