207
4-5. Using the driving support systems
4
Driving
● If the part of the windshield in front of
the front camera is fogged up or cov-
ered with condensation, or ice, use the
windshield defogger to remove the
fog, condensation, or ice. (P.296)
● If water droplets cannot be properly
removed from the area of the wind-
shield in front of the front camera by
the windshield wipers, replace the
wiper insert or wiper blade.
• To replace a wiper insert:
P.388
• If the wiper blades need to be
replaced, contact your Lexus dealer.
● Do not attach window tint to the wind-
shield.
● Replace the windshield if it is damaged
or cracked.
If the windshield needs to be replaced,
contact your Lexus dealer.
● Do not allow liquids to contact the
front camera.
● Do not allow bright lights to shine into
the front camera.
● Do not dirty or damage the front cam-
era.
When cleaning the inside of the wind-
shield, do not allow glass cleaner to
contact the lens of the front camera.
Also, do not touch the lens.
If the lens is dirty or damaged, contact
your Lexus dealer.
● Do not subject the front camera to a
strong impact.
● Do not change the installation position
or direction of the front camera or
remove it.
● Do not disassemble the front camera.
● Do not modify any components of the
vehicle around the front camera
(inside rear view mirror, etc.) or ceiling.
● Do not attach any accessories to the
hood, front grille or front bumper that
may obstruct the front camera. Con-
tact your Lexus dealerfor details.
● If a surfboard or other long object is to
be mounted on the roof, make sure
that it will not obstruct the front cam-
era.
● Do not modify the headlights or other
lights.