163
3-2. Using the audio system
3
Interior features
Using Dolby
noise reduction
Push the ( ) button.
Reduces the level of noise for tapes recorded with Dolby NR only.
Dolby noise reduction is manufactured under license from Dolby Lab-
oratories Licensing Corporation. “DOLBY” and the double-D symbol
( ) are registered trademarks of Dolby Laboratories.
■ Canceling
To cancel ( ) and (RPT): Push the same button.
To cancel ( ) and ( ): Push the same button or .
■ When the cassette player does not operate correctly due to the recording conditions
Forwarding to the beginning of a track, repeat, blank tape skip and fast-forward
may not be possible in the following situations:
● The interval between tracks is less than three seconds (beginning of track and
repeat playback) or less than fifteen seconds (blank tape skip).
● When there is noise between two tracks.
● The beginning and end of subsequent tracks is not clearly defined.
■ Cleaning the cassette player
Cassette player components (heads, capstan, pinch rollers) should be cleaned at
least once a month using a cleaning tape to remove dirt and dust that can easily
build up.
■ Using long playing cassette tapes
Avoid using tapes with a length of more than 90 minutes, as the tape used is very
thin and may become tangled in the cassette player.
To Next Page
Loading...
