1-3. Adjustable components (seats, mirrors, steering wheel)
The vehicle will memorize the positions of the driver’s seat, the tilt-and-tele-
scopic steering column and outside rear view mirrors.
Two different driving position profiles can be entered into the computer’s
memory.
The same buttons are found on the front passenger’s side, allowing the posi-
tion of the front passenger’s seat to be memorized.
■ Setting the driving position
With the transmission selector lever in the “P” position, turn the
engine switch to the “ON” position.
Adjust the driver’s seat, tilt and telescopic steering column, and
outside rear view mirrors to the desired positions.
While pushing the “SET” button,
push button “1” or “2” until the sig-
nal beeps.
By repeating these three steps and
pressing the other button, the driv-
ing position for another driver can
be recorded.
To Next Page
Loading...
