Translation of the original German installation and operation instructions GA01218_001_C1
5 Maintenance 39
5.1 Maintenance Plan 40
5.2 Leybold Service 41
5.3 Monitoring the Oil Level 42
5.3.1 Checking the Condition of the Oil 42
5.4 Oil Change 43
5.5 Cleaning the Inlet Screen 45
5.6 Removing and Fitting the Internal Demister 45
5.7 Disassembly and Reassembly of the Motor 47
5.7.1 Checking the Coupling 48
5.8 Replacing the Shaft Seal 48
5.9 Removing and Remounting the Pump Module 51
5.9.1 Removing the Pump Module 51
5.9.2 Remounting the Pump Module 52
6 Troubleshooting 53
7 Wearing Parts and Original Spare Parts 55
8 Waste Disposal 55
EC Declaration of Conformity 56
EC Declaration of Incorporation 57
Contents
3GA01218_002_C1 - 07/2018 - © Leybold
To Next Page