Page
3 RS 232 C interface . . . . . . . . . . . . . . . . . . 25
3.1 Description . . . . . . . . . . . . . . . . . . . . . . . . 25
3.2 Interface parameters . . . . . . . . . . . . . . . . . 25
3.2.1 Baud rate . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3.2.2 Data format . . . . . . . . . . . . . . . . . . . . . . . . 25
3.2.3 End and acknowledgement character
for remote operation . . . . . . . . . . . . . . . . . . 25
3.2.4 Output rate and end character for
printer output . . . . . . . . . . . . . . . . . . . . . . . 25
3.3 Initial operation . . . . . . . . . . . . . . . . . . . . . 25
3.3.1 Remote control operation . . . . . . . . . . . . . . 25
3.3.1.1 Cable link . . . . . . . . . . . . . . . . . . . . . . . . . 25
3.3.1.2 Baud rate and data format . . . . . . . . . . . . . 26
3.3.1.3 End character . . . . . . . . . . . . . . . . . . . . . . 26
3.3.1.4 Acknowledgement character . . . . . . . . . . . 26
3.3.1.5 Reset character . . . . . . . . . . . . . . . . . . . . . 27
3.3.2 Printer operation . . . . . . . . . . . . . . . . . . . . 27
3.3.2.1 Output of measurement data
to a printer . . . . . . . . . . . . . . . . . . . . . . . . . 27
3.3.2.2 RS 232 C baud rate and data format
for printer output . . . . . . . . . . . . . . . . . . . . 27
3.3.2.3 Output rate for printer output . . . . . . . . . . . 27
3.3.2.4 End character . . . . . . . . . . . . . . . . . . . . . . 27
3.4 Data output and data formats . . . . . . . . . . . 27
3.4.1 Measurement data output . . . . . . . . . . . . . 27
34.1.1 Remote control operation . . . . . . . . . . . . . . 27
3.4.1.2 Printer output . . . . . . . . . . . . . . . . . . . . . . . 27
3.4.2 Parameter output and response time . . . . . 28
3.5 Interface commands and data input
for A-series instruments with
RS 232 C interface . . . . . . . . . . . . . . . . . . 28
3.5.1 Formation of measurement data
and readout commands . . . . . . . . . . . . . . . 28
3.5.2 Trigger adjustment commands . . . . . . . . . . 29
3.5.3 Operating parameters . . . . . . . . . . . . . . . . 29
Page
3.6 Output of error messages . . . . . . . . . . . . . 29
3.6.1 Interface errors (ERI) . . . . . . . . . . . . . . . . . 29
3.7 Program examples for setting
the parameters . . . . . . . . . . . . . . . . . . . . . 30
3.8 Examples for the cable link between
the interface and an IBM
®
-PC . . . . . . . . . . 34
4 Maintenance . . . . . . . . . . . . . . . . . . . . . . . 35
4.1 Service at LEYBOLD’s . . . . . . . . . . . . . . . . 35
5 Brief operating instructions . . . . . . . . . . 36
3