▪ Check the nameplate. Do not use pump elements other than the lifting
lugs as handles.
▪ Only use the lifting lugs which are provided on the pump to lift the
pump with the specied lifting devices.
▪ Refer to the Installation drawing on page 32 for the space required to
install the pump.
▪ A pump that has been
lled with oil must only be moved in the upright
position (horizontally). Otherwise, the oil may escape.
▪ The angle of the slope must not be more than 10 degrees.
▪ Avoid any other orientations while you move the pump.
300956027_002_A0 - 03/2022 - © Leybold
28
Transportation
To Next Page
Loading...
Need help?
General
