38 300598802_002_C0 - 10/2016 - © Leybold
Safety information
On contamination of compressors, vacuum pumps
and components.
Scope
Every employer (user) is held responsible for the health and safety of his employees. This also applies to ser-
vice personnel performing maintenance work either at the premises of the user or the service company in-
charge.
By means of the declaration attached the contractor is to be informed about any possible contamination of the
compressor, vacuum pump or component sent in for servicing. Based on this information the contractor will be
able to take the necessary safety precautions.
Preparation before dispatch
Before shipping any parts, the user must complete the following declaration and add it to the dispatch papers.
All dispatch instructions laid down in the manual must be followed e.g.:
● Drain all service fluids
● Remove filter elements
● Seal all openings airtight
● Pack/handle appropriately
● Attach the declaration of contamination outside of the packaging
To Next Page
Loading...
Need help?
General
