37
Problem Solution
An unstable mounting solution (sway in the mounting pole) may
result in the tipping bucket incorrectly incrementing rainfall. Make
sure you have a stable, level mounting solution. (Refer page 9
ADJUSTING THE 7-IN-1 WIRELESS SENSOR LEVEL)
Rain gauge repors
rain when it it not
raining.
Check your router for problems.
1.)
2.)
3.)
4.)
5.)
Check Wi-Fi symbol on the display. If wireless connectivity is
successful, the Wi-Fi icon will be displayed in the time filed.
Make sure your modem Wi-Fi settings are correct (network
name, and password)
Make sure the weather station is plugged into AC power. The
weather station will not connect to Wi-Fi when powered by
batteries only.
The console only supports and connects to 2.4GHz routers. If
your own a 5GHz router, and it is a dual band router, you will
need to disable the 5Ghz band, and enable the 2.4GHz band.
The weather does not support guest networks.
1.)
2.)
3.)
4.)
5.)
Confirm your password or key is correct. It is the password you
registered on Wunderground.com.
Wunderground.com. Your underground.com password cannot
begin with non-alphanumeric characters (a limitation of
Wunderground.com, not the station). Example, $worknet is not
a valid password, but worknet$ is valid)
Confirm your station ID ix correct. The station ID is all caps, and
the most common issue is substituting and O for a 0 (or vice
versa). Example, KCAPHOEM12, not KCAPH0EM12.
Make sure the data and time is correct on the weather station.
If incorrect, you may be reporting old data, not real time data.
Make sure your time zone is set properly. If incorrect, you may
be reporting old data, not real time data.
Check your router firewall settings. The weather station sends
data via Port 80.
Wi-Fi does not display
on the weather
station
Data not reporting to
www.wunder-
ground.com or
www.weather-
cloud.net
To Next Page
Loading...
