Need help?Do you have a question about the LFF LWS125 and is the answer not in the manual?
Key features of the outdoor sensor, including measurement and battery status.
Details on the RF channel selection and battery compartment on the sensor's back.
Step-by-step instructions for connecting outdoor sensors to the main weather station.
Procedure to manually receive the atomic clock signal for accurate time.
Defines the sequence for setting time, date, time zone, and other preferences.
How to toggle and view the set times for Alarm 1 and Alarm 2.
Guide to setting the hours and minutes for both Alarm 1 and Alarm 2.
Instructions for turning Alarm 1 and Alarm 2 ON or OFF.
Method to stop the audible alarm signal once it is ringing.
How to pause an active alarm for a short period using the snooze feature.
Detailed steps for performing a factory reset to restore default settings.
General| Category | Weather Station |
|---|---|
| Measurement Parameters | Wind speed, Wind direction, Temperature, Humidity, Rainfall, Barometric pressure |
| Rainfall Resolution | 0.2 mm |
| Wind Speed Range | 0 to 50 m/s |
| Wind Direction Range | 0 to 360° |
| Humidity Range | 0 to 100% RH |
| Barometric Pressure Range | 300 to 1100 hPa |
| Communication | RS485 |
To Next Page
